PAC SWI-CP5 User Manual

Pacic Accessory Corporation
®
| Santa Ana, California 92705 | Ph. 866-931-8021 | support@pac-audio.com
©2013 Pacic Accessory Corporation
www.pac-audio.com
Rev. 012014
Pacific Accessory Corporation
SWI-CP5
Universal Steering Wheel Control Retention Interface
TM
Steering Wheel Control Interface
Page 1
Page 1
Introduction & Features
Features
The SWI-CP5 interface allows the retention of steering wheel controls (SWC), rear seat controls (RSC) and retained
accessory power (RAP) whenever replacing a factory radio. Use of this interface also allows you to program two radio
functions to each SWC button by using short press/long press dual command functionality. The SWI-CP5 works in
vehicles with either data or analog SWC.
Interface & Wiring Overview
• Compatible in vehicles equipped with LAN, LIN, CAN, Class II, Analog or Serial Data SWC
• Easily congurable using either a PC, smartphone, tablet or manually
• Audible feedback for programming conrmation
• Retains memory even if power is lost
• Ability to assign two radio functions to one SWC button
• Updatable via the Android Application, Apple Application, PC Application or USB ash drive.
• Create and save custom vehicle conguration les for later use.
• Highly visible tricolor LED to keep the user informed of the modules status.
• Equipped with a manual learning function for compatibility with unlisted vehicles.
(-) Chassis Ground
(+) Constant 12v Input
White/Red
Dark Green
Pink
Blue
Yellow/Black
White/Black
Red
Red/White
Black
Yellow
(-) Analog SWC Input 3
(+) Dual Wire CAN Hi Input
HVAC Output
12v Serial Data Input
(-) Analog SWC Input 2
(+) Accessory 12v Input
(+) Accessory 12v Output
Blue/Yellow SWC Output - Kenwood/Newer JVC
Purple
White
Pink/Black
Light Green
Class II Data Input
(-) Analog SWC Input 1
(-) Dual Wire CAN Low Input
(+) 12v Analog SWC Input
SW CAN Input
3.5mm Jack
SWC Output - Alpine, JVC, Clarion,
Pioneer, Sony, Boyo, Dual, Advent,
Lightning Audio or Visteon
1
DIP DIPON
2 3 4
1 2 3 4
5 6 7 8
ON
Vehicle DipswitchesVehicle Dipswitches
USB Port
Radio Dipswitches
Programming Button
Status LED
Please visit www.pac-audio.com/controlpro/App to download the smartphone or PC application that provides vehicle
specic wiring and vehicle conguration processes.

PAC SWI-CP5 Specifications

General

Brand	PAC
Model	SWI-CP5
Category	Recording Equipment
Language	English

Summary

Introduction and Features

Product Features Overview

Highlights key capabilities such as broad vehicle compatibility, easy configuration, memory retention, and dual command functionality.

Interface Wiring Diagram

Illustrates the connections for the SWI-CP5 interface, detailing power, ground, SWC, CAN, and HVAC signals.

Installation and Configuration Methods

App Mode Configuration

Utilize a PC, smartphone, or tablet app to automatically configure the SWI-CP5 for vehicle and SWC button assignments.

Manual Configuration Mode

Manually set dipswitches for specific vehicle and SWC button functions based on provided configuration data.

Manual Programming Mode

Program SWC values manually via the app or button for analog SWC vehicles; CAN-Bus vehicles cannot be programmed this way.

Radio Dipswitch Settings Guide

Reference chart for setting radio dipswitches for various brands like Alpine, JVC, Kenwood, Pioneer, Sony, and others.

Advanced Configuration and Mapping

USB Flash Drive Configuration

Configure the SWI-CP5 by loading a configuration file onto a USB flash drive and connecting it to the interface.

Manual SWC Button Mapping

Step-by-step guide to manually program steering wheel control buttons, including short press and long press functionality.

Radio Function Mapping Order

Lists the order in which radio functions should be mapped to SWC buttons for different radio brands.

SWC Button Re-assignment and Testing

SWC Button Re-assignment Procedure

Detailed steps for re-assigning SWC functions or programming dual command functionality (short/long press).

Testing and Verification

Instructions for verifying the correct operation of SWC functions and accessory power after installation.

Troubleshooting and FAQ

LED and Chime Legend

Reference guide for interpreting the LED colors and chime sounds during operation and programming.

Commonly Asked Questions

Answers to frequent queries regarding wiring information, dipswitch settings, accessory output, and master reset procedures.

Product Firmware Updates

Procedure for updating the SWI-CP5 firmware using a USB flash drive or the device-specific application.