Your new bicycle was assembled and tuned in the factory and then partially disassembled for shipping. You
may have purchased the bicycle already fully re-assembled and ready to ride QR in the shipping carton in the
partially disassembled form. The following instructions will enable you to prepare your bicycle for years of
enjoyable cycling. For more details on inspection, lubrication, maintenance and adjustment of any area please
refer to the relevant sections in this manual. If you need replacement parts or have questions pertaining to
assembly of your bicycle, call Pacific direct at:
PACIFIC SERVICE AND TECHNICAL SUPPORT:
1-800-283-3303
Monday - Friday 8:00 a.m. - 4:30 p.m. Central Time.
Tools Required:
I Phillips head screw driver; 4mm, 5mm
6mm & 8mm Allen keys; adjustable
wrench or a 9mm, 10mm, 14mm & 15mm
open and box end wrenches; and a pliers
with cable cutting ability,
3 © Copyright 2000 Pacific Cycles
To Next Page
Loading...
