20
SECTION 3
INSTALLATION
3 INSTALLATION
This section describes the installation of the ACX AC Power Source.
3.1 CHASSIS PLACEMENT
The ACX Power Source is designed to operate as a bench-top unit, or to fit into a standard 19-inch
rack. Provisions for mounting slide rails are included on the chassis.
THE ACX WEIGHS 40 lbs [18.2 kg]
USE EXTREME CARE WHEN MOVING THE UNIT
IN ORDER TO REDUCE CHANCE OF PHYSICAL INJURY.
WHEN MOUNTING SLIDE RAILS TO THE ACX CHASSIS, MAXIMUM SCREW LENGTH IS 8 mm.
LA ACX PESE 40 lbs [18.2Kg]
VEILLEZ A PRENDRE TOUTES LES PRECAUTIONS NECESSAIRES DURANT LE TRANSPORT DE
L’EQUIPEMENT AFIN DE MINIMISER TOUT RISQUE D’ACCIDENT PHYSIQUE.
LA LONGUEUR MAXIMUM DES VIS DESTINEES A FIXER LES GLISSIERES SUR LE CHASSIS
- - - - - - - - P A C K I N G N O T I C E - - - - - -
It is the customer's responsibility to insure that units are adequately
packaged when they are moved to a different location. The ACX should
always be packaged in the original shipping container when moved or
returned to the factory for service.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
To Next Page
Loading...