Pacific 110ACX - 7 Service; Service Procedure; System Level Factory Part Numbers; Sub-Assembly and Chassis Component Part Numbers

41
SECTION 7
SERVICE
7 SERVICE
This section describes service of the ACX AC Power Source.
7.1 SERVICE PROCEDURE
The ACX Power Source contains no user serviceable parts. Service is properly accomplished
by returning the unit to the factory or authorized service center. Under some circumstances, the
factory may authorize the user to perform limited sub-assembly or component changes as
deemed allowable by the factory service representative. For this purpose, many sub-assembly
and component level Pacific Power Source part numbers have been included here. Part
numbers for various components are listed separately for each Model.
When questions regarding operation arise or service is required, call the factory for instructions.
Pacific Power Source Corporation maintains a staff of highly trained technicians who are ready
to assist. The phone number to call is (714)898-2691.
7.2 SYSTEM LEVEL FACTORY PART NUMBERS
MODEL NAME
PART No.
MODEL 110ACX
1.0 kVA AC Power Source
200405
MODEL 115ACX
1.5 kVA AC Power Source
MODEL 118ACX
1.8 kVA AC Power Source
7.3 SUB-ASSEMBLY AND CHASSIS COMPONENT PART NUMBERS
The factory part numbers given in the following list are provided to aid the user in obtaining
spare or repair sub-assemblies and components where the factory has given permission, in
advance, for the user to perform field repairs on the Power Source.
SUB-ASSEMBLY FACTORY PART No.
UPC1 Programmable 1φ Controller:
141170
LCD Display Assembly:
139071
Power Amplifier Assembly:
200431
Input PFC Assembly:
200418
Keyboard Assembly:
200437
Input Filter Assembly:
200434
COMPONENT
FACTORY PART No.
Input Circuit Breaker:
716098
Front Panel Handle:
200526
Output Terminal Block:
705113
Input Terminal Block:
705113
Fan:
703200
Fuse:
712088