Pacvac Superpro battery 700 - Work Right; Cleaning Process Planning; Fishbone Cleaning Method

Work Right
LOOK AT THE LAYOUT (refer to the Fishbone Method below)
• Check the room layout (position of desks, tables, chairs, ttings etc.)
• Check the condition of the oor - how dirty it is on a scale of 1 to 10.
PLAN THE PROCESS
• See in your mind the shbone method over the entire area or room to be cleaned.
• Decide which areas are to be detail cleaned (the spine), or spot cleaned (the ribs).
CLEAN SMARTER
• Work one side of the shbone towards tail. Then back the other side towards head.
• Work to the plan - long strokes for the detail clean area and short dabs for the spot cleans.
1
2
3
Fish Head Start
Spine Heavy Trafc Areas -
Detail Clean
Ribs Light Trafc - Spot Clean
4
Tail Turn Around
Support: +618 9479 1444 www.pacvac.com
7