EasyManua.ls Logo

Pacvac Velo - Product Specific Safety Instructions; Symbol Definitions

Pacvac Velo
95 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
1. The following model have a “A”-weighted
emission sound pressure level (at ear) of:
Velo - 65.3dB(A)
2. WARNING Only use the socket outlet on the
machine for purposes specified within these
instructions.
3. This appliance may be fitted with a power
socket outlet (excludes wispa model). A power
socket outlet is designed for use with applicably
approved electric powerhead attachments.
Powerhead attachments use rotating brushes
to agitate carpet fibres in order to dislodge
dust and/or debris. Maximum wattage for such
attachment shall not exceed 200 watts.
4. Part No. FLT001 - All purpose floor tool is
intended for vacuuming dry dust and debris off
floor surfaces.
5. Part No. ACC001 - Dusting brush is intended
for vacuuming of dry dust from blinds and other
delicate surfaces.
6. Part No. ACC002 - Crevice tool is intended
for vacuuming of dry dust and debris from
crevices.
7. Part No. ACC003 - Upholstery tool is intended
for vacuuming of dry dust from upholstered
surfaces.
Motor Thermostat
IMPORTANT: The motor is equipped with a
thermostat. If for any reason, the vacuum cleaner should
over-heat, the thermostat will automatically turn the unit
off. Should this occur, turn off the switch and unplug the
vacuum cleaner from the electrical outlet and conduct
safety and maintenance checks. Allow the cleaner to
cool for approximately 30 minutes. To re-start, plug into
a power point and switch back on.
Product Specific Safety Instructions
RETAIN THESE SAFETY INSTRUCTIONS FOR FUTURE USE.
Symbol Definitions
1. Attention! 2. Operator’s Manual; Operating Instructions
ENGLISH
Velo

Table of Contents

Related product manuals