29
CHANGING IP SUBNET
The IP address is set to 192.168.1.99 by default, but you can change that according to your network
needs. To change the IP subnet of the router, please take the following steps.
1. Navigate to System->Network->Interfaces. As an example, we will change the IP subnet of the
internal network to be on the 192.168.10.x subnet.
2. Double-click on the internal network.
3. Enter 192.168.10.99/255.255.255.0 in the IP/Network Mask field. Under Address Range, adjust
the starting and ending address to match the new subnet. Change the DNS server to
192.168.10.99. Click OK.
4. Navigate to Policy & Objects->Objects->Addresses.
5. Double-click on VLAN_1 to edit it. Change the Subnet/IP Range field to
192.168.10.0/255.255.255.0. Hit OK to finalize.
To Next Page
Loading...
