28
11. You will now see the entry listed. The dual wan redundancy setup is complete. If wan1 fails, the
router will automatically switch to wan2. If wan1 comes back up, the router will switch back to
wan1.
DDNS
Dynamic DNS lets users with non-static IP address have a static DNS name. Many services let you
register Dynamic DNS, some of which are free. To configure DDNS, enter the appropriate CLI-commands
on the router. To configure a DNS name of pakedgerouter.dyndns.org from the DDNS provider DynDNS,
please take the following steps.
1. Navigate to System->Dashboard->Status and scroll down to the CLI widget.
2. Click on the widget to enter commands onto the router. You will need to enter the following
commands:
config system ddns
edit 1
set ddns-server DDNS provider
set ddns-domain DNS name
set ddns-user username to the DDNS account
set ddns-password password to the DDNS account
set monitor-interface wan port that you are using
end
3. The DDNS setup is now complete.
To Next Page
Loading...
