EasyManua.ls Logo

Pakedge Device & Software K60D - INTRODUCTION

Default Icon
42 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3
INTRODUCTION
The popularity and affordability of IP networking has driven audio/video and control networks to share
the same physical wiring with computer networks. However, computer data can tolerate unpredictable
latency in ways that audio/video streaming and control systems cannot. Sophisticated systems require
the same robustness as an enterprise network, ensuring that IP-based controls occur instantly and
audio/video packets arrive in time.
Note: If this is your first time installing this product, please read this manual in its entirety.
Preset IP Address Values: The K60D is preconfigured for “out-of-box” VLAN installations. Therefore, the
IP addresses of all VLANs are predefined. Please note that changing IP addresses may affect other
preconfigured features. Contact Pakedge support for more information.
****Warning****
Factory Reset: Pakedge does not recommend performing a factory reset unless absolutely necessary. If
you would like to reset the device, please contact technical support at: support@pakedge.com or
(650)385-8703.
NOTE: Using the routers hardware reset button will erase all Pakedge configurations and make the
device unreliable on your network.

Other manuals for Pakedge Device & Software K60D

Related product manuals