31
8. You will see the DHCP reservation edit screen. Click OK to reserve the IP address.
DMZ
The DMZ port is a separate network on its own subnet. This port does not have access to the normal
internal VLANs; however, all the internal networks have access to it (except for the guest network on
VLAN 6).
The purpose of placing a device on the DMZ port is to add security to the network. If an intruder gains
access to the DMZ network, they will have no access to the internal network. To view the IP subnet
settings on the DMZ, please take the following steps.
1. Navigate to System->Network->Interfaces. Double-click on DMZ.
2. In case you need to make any changes to the DMZ port, this page will display the IP subnet
settings. Click OK.
To Next Page
Loading...
