WAP-VKIT User Manual
11
2) Using another Ethernet cable (not included), connect one end to port 7 on the SW8-4PB ,
and the other end to switch port 2 on the RT-50V (the router in the RSB-KXX Preconfigured
VLAN Kit).
3) Using another Ethernet cable for each WAP-W5N, connect the WAP-W5Ns to the PoE ports
on the SW8-4PB. Be sure to plug the Ethernet cable to the WAP-W5N using the RJ45 jack
labeled “LAN” (Do not use CON).
To Next Page
Loading...
