WAP-VKIT User Manual
17
5.1 Accessing the Controller Web Interface
To change settings, follow these steps to display the Web Interface:
1. Open a web browser, type the following default IP address for the controller in the
browser’s address bar, and press Enter: https://192.168.1.240.
2. If any security or certificate warning windows appear, click “Yes” or “Continue to web page”
to proceed.
3. A pop-up window appears with the Web Management Interface login dialog. Type the
username admin and the default password pakedgec and click OK to continue. The
WLAN Management home page opens, showing the Monitor module and displaying
the Dashboard charts.
To Next Page
Loading...
