Pakedge Device & Software WAP-VKIT - Changing the Default Password

WAP-VKIT User Manual
18
5.2 Changing Default Password
For security reasons, the default password should be changed. Click the Maintenance
button, and under the Password area, click the Change Password.
1. In the User Name text box, type in the user name admin.
2. In the Current Password text box, type in pakedgec.
3. In the New Password text box, type a new password (1 to 256 characters).
4. In the Re-type New Password text box, retype the new password for validation.
5. Click OK to save your changes and exit.