Pakedge Device & Software WAP-VKIT - Adding a New SSID Profile

WAP-VKIT User Manual
21
It is highly recommended that you do not modify these settings. However, if absolutely
necessary, please refer to the following guidelines.
Note: Changing the SSID directly is not possible; however, you can add an ESS Profile to
create a new SSID or delete one to remove it.
5.4.1 – Adding an SSID Profile
1) To create a new SSID, click Configuration | Wireless | ESS, and click Add.
2) In this example, we will create a new ESS Profile called New_Profile_Name. Our SSID
will be New_SSID. We will choose Pakedge_WEP64 encryption.
3) Next, we will choose if the SSID will be untagged (No VLAN) or if it will belong to one
of the existing VLANS as shown.