WAP-VKIT User Manual
37
Zero-Configuration
- Automatically selects power and channel settings
- Automatically discovers controllers and download configuration settings
- Zero touch, plug and play deployments
System Management
- Centralized and remote management and software upgrades via System Director web- based
GUI, SNMP, Command-Line Interface (CLI) via serial port, SSH, Telnet, centrally managed via
EzRF Management Suite
- Centralized Security Policy for WLAN, Multiple ESSIDs and VLANs with their own
administrative/security policies
Intelligent RF Management
- Coordination of access points with load-balancing for predictable performance
- Centralized auto-discovery, auto-channel configuration, and auto-power selection for APs
- Co-channel interference management
WIRELESS SPECIFICATIONS
WIRELESS SPECIFICATIONS*
Wireless Standards
- IEEE 802.11 a/b/g/n, IEEE 802.11i support (AES, WEP, WPA, WPA2), IEEE 802.11e, WMM
Power Management
- Optimal power control in 1 dBm increments
- Ability to disable unused radios via software to reduce power consumption
Antenna
- Standard multiband, omni-directional white antennas (included); Standard Antenna Gain~ 2.2
dBi for 2.4 GHz and 3 dBi for 5 GHz. Antenna gain not included in Average Transmit Power
specified
- RP-SMA connectors for external antenna options
Client Support
- Support for clients that perform active and passive scanning
- Support for clients that pre-authenticate
- Support for clients that change rapidly to and from power save mode
- Power Save Mode for clients in both QoS mode and non-QoS mode
IEEE802.11N
Frequency Band
- 2.402 to 2.485 GHz, 5.15 to 5.25 GHz, 5.725 to 5.825 GHz
Operating Channels
- 1 through 11 for 2.4 GHz band
- 32 through 160 for 5 GHz band
Data Rates (Mbps)
- 20 MHz: 130, 117, 104, 78, 65, 58.5, 54, 52, 48, 39, 36, 26, 24, 19.5, 18, 13, 12, 11, 9, 6.5, 5.5, 2,
1 Mbps
- 40 MHz: 300, 270, 243, 216, 162, 135, 121.5, 108, 81.5, 81, 54, 48, 40.5, 36, 27.5, 27, 24, 18,
13.5, 12, 11, 9, 6, 5.5, 2, 1 Mbps with automatic rate adaption