WAP-VKIT User Manual
4
****Warning****
1) No Factory Reset- The WAP-VKIT was designed to be a very robust
and exceptionally reliable product. Because of this, you will find it
does not have a hardware or software reset button. The product can
only be reset by Pakedge either remotely (if the router is connected to
a working Internet connection with remote access) or at Pakedge’s
facility. We highly recommend using the product only as described in
the Pakedge “Installation User Manual.”
2) Preset IP Address Values- the WAP-VKIT was designed to simplify
a complex Virtual Wireless Network installation and is preconfigured
for an “out-of-the-box” VLAN installation with Pakedge RSB-Kxx-
VLAN Router and Switch Kit. Therefore, the IP address values of all
VLANs are predefined as described in the Installation User Manual.
If different IP address values are absolutely required, please be
aware that changing them may affect other preconfigured features.
Contact Pakedge support for more information.
If you have further questions, email support@pakedge.com or call 1-650-
385-8703.
To Next Page
Loading...
