Pakedge Device & Software WAP-VKIT - Wired and Wireless Support

WAP-VKIT User Manual
40
- Multiple ESSID/BSSID each with flexibility of separate and shared Security Policy
Rogue Detection and Suppression
- All radios capable of scanning 802.11n, 802.11a, and 802.11b/g for rogue devices
Security Firewall
- 10,000 simultaneous sessions
- System-configured or per-user Radius-configured firewall policy
MOBILITY
MOBILITY
Zero-loss Handoffs
- Infrastructure-controlled zero-loss handoff mechanism for standard Wi-Fi clients
Virtual Cell Load Balancing
- Virtual Cell provides load balancing coordination for improved performance and WLAN
resiliency upon AP failure
CENTRALIZED MANAGEMENT
CENTRALIZED MANAGEMENT
Zero-Configuration
- Automatically selects power and channel settings
- Automatically discovers controllers and download configuration settings
- Zero-touch, plug-and-play deployments
System Management
- Centralized and remote management and software upgrades via System Director web-based
GUI, SNMP, command-line interface (CLI) via serial port, SSH, Telnet, centrally managed via EzRF
Management Suite
- Centralized Security Policy for WLAN, Multiple ESSIDs and VLANs with their own
administrative/security policies
Intelligent RF Management
- Coordination of access points with load-balancing for predictable performance
- Centralized auto-discovery, auto-channel configuration, and auto-power selection for APs
- Co-channel interference management
WI RED/WI RELESS SUPPORT
WIRED/WIRELESS SUPPORT
Wireless Compliance
- IEEE 802.11 a/b/g/n, IEEE 802.11i support (AES, WEP, WPA, WPA2), IEEE 802.11e, WMM
Automatic Discovery & Configuration
- All access points
Wired/Switching
- IEEE 802.1Q VLAN tagging, GRE Tunnelling, and IEEE 802.1D Spanning Tree Protocol
PHYSICAL SPECIFICATIONS
Dimensions
- 17” width x 1 3/4” height x 11“ depth (43.2 cm width x 4.5 cm height x 28.0 cm depth)
Weight
- 8.6 lbs; 16 lbs with packaging