22 23
WK-1
In Access Point Mode, the WK-1-C broadcasts both 2.4 GHz and 5 GHz signals to stations that
support 802.11 ac.
Access Point Mode
Smartphone
Panel
Laptop
Laptop
Tablet
Ethernet Cable
Description of Operating Modes
In WDS Bridge Mode, you can connect the WK-1-C to a client by its Ethernet port. The WK-1-C will
receive the wireless signal from an access point and send the signal, through its Ethernet port, to
the client. A separate WK-1-C must be in WDS Root Access Point mode for this setting to operate.
WDS Bridge Mode
WK-1
WK-1
Laptop
Ethernet Cable
Ethernet Cable
To Next Page
Loading...
