Pakedge Device & Software WK-1-C - Table of Contents; Package Contents

2 3
Package Contents 3
WK-1-C Mounting 4
Powering Up the Access Point 12
Conguring the Hardware 15
Step 1: Login 15
Step 2: Radio 21
Step 3: Security Proles 25
Step 4: Conguration 27
Contents
Please refer to the installation manual of your product.
WK-1-C
• 802.11ac Dual Band Access Point
• Built in 2x2 internal antennas
• Powered by PoE+
• 2 LAN ports for Network Extensions
System Requirements
Windows or Mac PC with an Ethernet interface.
WK-1-C Default Settings
Operation Mode: Access Point
IP Address: 192.168.1.250
Username/Password: pakedge/pakedgea
SSID: Pakedge2.4-1 and Pakedge5-1
Power Output: High
Security: Disabled
Package Contents