24 25
WDS Repeater Mode can be used to connect two WK-1-C access points wirelessly and extend your
wireless network coverage. A separate WK-1-C must be in WDS Root Access Point mode for this
setting to operate.
WDS Repeater Mode
Refer to the user manual for information on the other operating modes.
WK-1
WK-1
Laptop
Ethernet Cable
The next tab over is the Security Settings. You can change the SSID and security settings for 2.4
GHz and 5 GHz.
Step 3: Security Proles
This security is known to be the most secure and is compatible with all the latest devices.
Note: The device/client you are working with factors into its security types. For example, older
laptops or phones do not support WPA2 security. Also, some devices only accept a certain security
type. You may want to reference your device specications.
To Next Page
Loading...
