What to do if Panametrics Measuring Instruments show Err 1: No Probe?
If your Panametrics Measuring Instruments display the error 'Err 1: No Probe', it means the necessary probe is not connected. To resolve this, connect the required probe.
Instructions for turning the PM880 AC on and off, including the shutdown menu.
Guide to navigating menus and entering data using the PM880 AC keypad.
Procedure for entering essential setup data like probe type and calibration.
Steps to select and configure the display of measurement parameters.
Instructions on accessing the Site Manager and creating/saving site files.
Detailed steps for installing the moisture probe into a sample system.
Guidance on connecting the sample system to the process at the measurement site.
Instructions for correctly connecting the probe cable to the PM880 AC unit.
Procedure to retrieve previously programmed site files for measurements.
Steps for operating the sample system to allow for measurements.
Instructions for performing a leak test to ensure system integrity.
Safe procedures for closing down and disconnecting the sample system.
Overview of the PM880 AC screen layout and its various sections.
Guide to selecting measurement types, number of views, and display formats.
Instructions for assigning or clearing functions for the PM880 AC's function keys.
How to manually control and set the timer for the backlight.
Procedure for adjusting the screen contrast for better visibility.
Steps to capture the current screen display and save it to file or printer.
How to select global measurement units for the PM880 AC.
Procedure for setting the current date and time for accurate data logging.
Customizing date formats and time display (AM/PM or 24-hour).
Instructions for adding a descriptive message to a site file.
Configuring reminders for probe serial numbers and calibration dates.
Setting the interval for automatic calibration to compensate for drift.
Guide to entering constants, user functions, and tables for advanced calculations.
Procedure for entering a user constant multiplier for moisture ppm values.
Activating and using the CER feature for faster measurements in dry-down conditions.
Inputting reference values for moisture and pressure measurement circuitry.
Placing the PM880 AC into sleep mode to conserve power.
Accessing and viewing meter software and hardware information.
Procedure for changing the PM880 AC's display language.
How to access and navigate the PM880 AC's built-in help system.
Steps to create and configure a new data log.
Instructions for pausing one or more currently running logs.
Procedures for starting pending logs or restarting paused logs.
How to permanently stop a log that is currently running or pending.
Steps to view all existing logs, regardless of the current site file.
Accessing detailed information about log status, dates, and measurements.
Methods for viewing logged data in graph or spreadsheet format.
Procedure for saving a newly created site file.
Steps to retrieve a previously programmed site file.
How to save changes made to an existing site file.
Instructions for renaming existing site or log files.
Steps to copy an existing log file to create a new one.
Procedure for deleting unwanted files from the PM880 AC memory.
How to change the order of files listed in managers (alphabetical or chronological).
Guide for setting up Infrared (IrDA) communications with PCs and printers.
Overview of file transfer and printing capabilities across Managers.
Steps for sending site files, log files, and snapshots to a printer.
Instructions for printing various types of data reports from the PM880 AC.
Methods for transferring files from the PM880 AC to a PC.
Steps to transfer site and meter files from a PC to the PM880 AC.
How to monitor file sizes and remaining memory on the PM880 AC.
Procedure for testing the PM880 AC screen functionality and display.
Instructions for testing the functionality of each key on the PM880 AC keypad.
How to perform a test on the watchdog timer circuit for meter responsiveness.
Procedure to restore the PM880 AC to its original factory default settings.
Managing password-based security levels and remote access settings.
Steps to upgrade the PM880 AC user program via IR transfer.
Guidance on sending probes for recalibration and installing new or recalibrated probes.
Procedure for recalibrating the pressure sensor using specific data points.
Table of error messages and their possible problems and actions.
Troubleshooting guide for common issues with measurement readings.
Description of the PM880 AC hygrometer, its display, keypad, and interface.
Overview of the different probe types compatible with the PM880 AC.
Details on interconnecting cables for different probe types and their lengths.
General specifications including channels, dimensions, weight, and enclosure.
Summary of operational features like site programming, data logging, and display functions.
Specifications for memory, operating temperature, keypad, display, and I/O.
Information on probe compatibility, calibration, and measurement ranges.
Specifications for dew/frost point temperature range, accuracy, and repeatability.
Details on optional thermistor for temperature measurement range and accuracy.
Specifications for optional pressure sensor ranges, accuracy, and proof pressure.
Specifications for the sample system, including wetted parts and operating pressure.
List of optional accessories like IR adapters and printers.
Guidelines for selecting an appropriate measurement site and installation precautions.
Factors affecting probe performance and calibration recommendations.
Recommendations for designing and constructing effective sample systems.
Visual representation of the PM880 AC's Site Menu structure.
Visual representation of the PM880 AC's Program Menu structure.
Visual representation of the PM880 AC's Meter Menu structure.
Visual representation of the PM880 AC's Logging Menu structure.
Visual representation of the PM880 AC's Service Menu structure.
General| Type | Ultrasonic Flow Meter |
|---|---|
| Fluid Types | Liquids |
| Outputs | 4-20 mA, relay |
| Display | LCD |
| Output | 4-20 mA, relay |
| Probe Type | Clamp-on |
To Next Page
