Panasonic AG-7330 - Page 33

Switch Settings
eTurn TV Monitor “ON”.
e@Set the Input Selector to “LINE”.
Set the Sync Mode Selector to “NORM”.
eSet the EXT Timer Selector to “OFF”.
elnsert a cassette. Make sure that the tab is in place.
Clear the Tape Memory.
1) Make the necessary adjustments on the camera. Refer to
the Operating Instructions of the camera you are using on
how to handle the camera and how to start and stop
camera recording.
2) Push Record Button together with the Play Button. The
indicator lamps for REC, PLAY and PAUSE/STILL should
light up. The unit go into the standby mode.
me NIy ~ by
7S gk UgS
Audio Level Adjustment
Adjust audio CH1 and/or CH2 recording level as described on
page 17 section “Audio Level Adjustment”.
[i
aa,
Sound Recording with Microphones
If you wish to record sound with microphones, connect the
microphones to MIC Jacks (CH1 and 2). If the microphone and
the audio cable are connected at the same time, only the
microphone sound will be recorded.
ores)
To MIC Input of
front pane! CH1
and/or CH2.
Microphones
—33—
SE Se a OT ere eee