Panasonic AG-7330 - Page 35

Dubbing with composite (VIDEO IN/OUT)
Connector
When you wish to duplicate a tape, two AG-7330 VTRs can be used for duplicating tapes (dubbing).
Audio Cable
Video Cable
Video OUT
Source VTR
AG-7330
Set Input Signal Selector on the editor VTR to “LINE”.
eTurn both units “ON”.
eTurn TV Monitor “ON”.
©Set the Image Selector on the editor/source VTR to “EDIT”.
Turn the TV “ON” and select the same channel as the editor
VTR (unused broadcasting channel).
eSet the EXT Timer Selector to “OFF”.
Set the Sync Mode Selector as follows:
Editor (Recording) VTR; “NORM”,
Source (Playback) VTR; “INT”.
@lnsert a cassette tape. Make sure that the tab is in place on
the editor VTR.
Clear the Tape Memory.
~35—
Video IN
ysesaacomsrg | = |
Editor VTR
AG-7330
TV Monitor
1) Place the recorded cassette in the source VTR and a blank
cassette in the editor VTR.
2) Push the Play Button on the source VTR.
3) Push the Record Button together with the Play Button to set
the editor VTR.
4) Push the Stop Button to stop the dubbing.