Panasonic AG-8700E - Page 20

7. Press the RESET button at the position
where the tape is to be automatically
stopped.
The tape counter displays “0:00:00:00.”
3. Proceed with fast forward or rewinding.
The tape automatically stops when the tape counter display
nears the “0:00:00:00” mark.
NOTE
@ The AUTO STOP function does not work when:
¢ The CONTROL switch is at the “REMOTE” position.
* The CTL/TC/UB button is at any position except “CTL.”
¢ DIAL MODE switch is at the “MENU” position.
M The AUDIO OUT level can be selected using the switch (located below the circuit board’s metal
clamp) on the AUDIO2 printed circuit board. (See page E-56.)
— E-20 -