Panasonic AG-8700E - Page 44

Editing set-up values
Item Set-up value
Superimpose display No. | Superimpose display
AUTO PREROLLENTRY|0O [NOTENTERED
Of
|
ENTERED!
22°:
Description of function
Selects whether to enter IN point by preroll
“| command when IN point has not been entered.
00: Not entered
01: Entered
PREROLL TIME 00 0 SEC
01 1 SEC
05 se ee) SEC
to 10 SEC
15 18 SEC
6004 | PLAY DELAY 00... |. O FRAME
01 1 FRAME
05 | 5 FRAME
10 |10 FRAME
15 115 FRAME
FRAME SERVO
02 COLOUR FRAME
pf
Selects preroll time for 9P control from 0 to 15 zi
sec.
:
Selects play delay time during play start from
0 to 15 frames.
Sets framing mode
00: Set to this position when signals not in
conformity with standard signals are
supplied. Framing is not conducted.
01: Framing is conducted if set to this position
when signals in conformity with standard
signals are supplied.
02: 4 sequence colour framing mode is
activated.
[The shading denotes the initial setting.]
@ At the SYNC EXT setting (item No. 1001), the COLOUR FRAME function does not operate, and only framing is
conducted.
@ Do not synchronize the phase at the source machine during colour framing editing. (Do this at the editor.)
—E-44 -