Chapter 10 Notes — Warning system
- 197 -
[CANNOT SELECT MORE CLIPS.] It has tried to select more than 99 clips. ≥ Execute the process such as copying by every 99 clips.
[SELECT THE CLIP TO BE
DELETED.]
It has tried to delete a clip without choosing any. ≥ Select a clip to be deleted.
[SELECT THE CLIPS TO COPY.] It has tried to copy a clip without choosing any. ≥ Select a clip to be copied.
(For the )
[SELECT THE CLIP TO RE-
CONNECT.]
Re-connecting was tried to be executed without choosing
any clips.
≥ Select the clips to be re-connected.
[Insert a card in slot 1.] Copying was tried to be executed without inserting a
memory card into card slot 1.
≥ Insert a memory card into card slot 1.
[Insert a card in slot 2.] Copying was tried to be executed without inserting a
memory card into card slot 2.
≥ Insert a memory card into card slot 2.
[REINSERT OR CHECK CARD
<SLOT 1>]/[REINSERT OR CHECK
CARD <SLOT 2>]
It has tried to copy to an error card. ≥ Check the memory card.
[CANNOT COPY.] Copying was attempted while the system frequency
(59.94 Hz and 50.00 Hz) of the memory card to copy from
and the memory card to copy to are different for content
recorded in AVCHD format.
≥ Set the same system frequency (59.94 Hz system or
50.00 Hz system) for the content of the memory card to
copy from and the memory card to copy to.
≥ The system frequency information for the AVCHD format
is confirmed at the time of formatting or at the first
recording.
[CANNOT RECORD.] Cannot be recorded. ≥ Perform recording after making it possible.
[REC PAUSE INVALID] The unit tried to stop the next recording before the previous
recording finished writing to the memory card.
≥ Stop recording after writing to the memory card is
complete. Recording can be stopped after the message
that is displayed disappears.
[WRITE PROTECTED] The memory card has been write-protected. ≥ Insert a memory card with write access.
Screen display
Description Behavior and cause
Camera image screen
CX10
To Next Page
Loading...
