Chapter 4 Operation — Menu settings
- 87 -
[USB-LAN IPv6 SETTING]
[ENABLE/DISABLE]
Sets whether to use IPv6.
(Factory setting: [DISABLE])
[DHCP]
Sets whether to use automatic acquisition via DHCP.
(Factory setting: [OFF])
[IP ADDRESS]
Sets the IP address.
(Factory setting: [::])
[PREFIX LENGTH]
Sets the prefix length of the subnet.
(Factory setting: [64])
[DEFAULT GATEWAY]
Sets the default gateway.
(Factory setting: [::])
[PRIMARY DNS]
Sets the primary DNS server.
(Factory setting: [::])
[SECONDARY DNS]
Sets the secondary DNS server.
(Factory setting: [::])
[INFORMATION]
[STATUS]
Displays the status of the network function.
[UTILITY]
Performs the various operations related to the network function.
[NETWORK INITIALIZE]
Returns the various networks settings to the factory default state and restarts the unit.
[EASY IP SETTING]
Sets the time to accept EASY IP Setup Software.
The items that can be set are as follows.
≥ [DISABLE], [20 MIN.], [UNLIMITED]
(Factory setting: [DISABLE])
0 This is fixed to [UNLIMITED] when [NDI|HX] is selected in [NETWORK FUNC].
[EASY IP CAMERA TITLE]
Configure the individual device names to display in EASY IP Setup Software. (15 characters or less)
≥ Factory setting:
The model number of the unit you are using is set. (For example: [AG-CX10], etc.)
0 The camera title set here is also displayed as the individual device name in the NDI|HX compatible switcher.
[ENABLE] Uses IPv6.
[DISABLE] Does not use IPv6.
[OFF] Does not use DHCP.
[CLIENT] Performs automatic acquisition through DHCP.
To Next Page
Loading...
