Panasonic AG-DVC180BMC

DIS-8
8. Removal of Handle Unit
1. Remove the VF CASE L Unit.
2. Unscrew the 4 screws (K) and disconnect the
connector P551 on TOP CONNECT C.B.A., then
remove the HANDLE UNIT.
9. Removal of EVF Unit
1. Remove the Handle Unit.
2. Unscrew the 2 screws (L).
3. Make the condition which lift up the EVF Unit as
shown figure and unscrew the 2 screws (M).
4. Disconnect the connector P555 on TOP
CONNECT C.B.A. and remove the EVF Unit.
SCREW (J)
BLACK
4mm
SCREW (K)
HANDLE UNIT
P551
SCREW (K)
SCREW (K)
SCREW (L)
P555
EVF UNIT
SILVER
4mm
SCREW (L) & (M)
SCREW (M)
SCREW (M)