ELE-9
4. ADJUSTMENT PROCEDURE (CAMERA SECTION)
Set the Camera-Recorder to CAMERA mode.
Perform adjustments according to the order of main menu.
4-1. Zoom SW center value adjustment
Double-click the adjustment item “Zoom SW center value” in the main menu.
The instructions of adjustment will appear.
Perform adjustment according to the instructions.
1. Set the unit to CAMERA mode.
2. Select “Edit” → “Editing the CAM memory”.
Readout the data of zoom position at T side
3. Click “RAM-Read” in “Device”.
4. Press T side button of zoom SW on the Grip cover to T position fully and release the finger from the button
slowly.
5. Input “8FE” in “ADRS” box and click “Execute(E
)” button.
6. Take notes of numeral value in “Data” box.
7. Input “8FF” in “ADRS” box and click “Execute(E
)” button.
8. Take notes of numeral value in “Data” box.
9. Repeat three times from the above steps 4 to 8.
10. Select the minimum value among three measurement value.
Readout the data of zoom position at W side
11. Press S side button of zoom SW on the Grip cover to W position fully and release the finger from the button
slowly.
12. Input “8FE” in “ADRS” box and click “Execute(E
)” button.
13. Take notes of numeral value in “Data” box.
14. Input “8FF” in “ADRS” box and click “Execute(E
)” button.
15. Take notes of numeral value in “Data” box.
16. Repeat three times from the above steps 11 to 15.
17. Select the maximum value among three measurement value.
To Next Page
Loading...
