ELE-10
Calculation of zoom SW center value
18. Calculate the center value with the minimum value of T side and the maximum value of W side as follows.
<For example>
--- FE (Upper) FF (Lower)
01 C3
01 C5
Tele
01 C7
02 2C
02 2C
Wide
02 2B
Writing the data of zoom SW center value
19. Click “EEPROM(U)-Write” in “Device”.
20. Input “1E7” in “ADRS” box.
21. Input the upper portion of zoom SW center value, which is calculated at step 18, in “Data” box and click
“Execute” button.
Example: Input “01” when the zoom SW center value is “01F7”.
22. Click “EEPROM(L)-Write” in “Device”.
23. Confirm that “1E7” is in “ADRS” box.
24. Input the lower portion of zoom SW center value, which is calculated at step 18, in “Data” box and click
“Execute(E
)” button.
Example: Input “F7” when the zoom SW center value is “01F7”.
25. Operate the zoom SW on the Grip cover and confirm that zoom operation works smoothly.
Select minumum value
Calculate center value
(01C3 + 022C)÷2 = 01F7
Upper
Lower
01C3
022C
Select maximum value
To Next Page
Loading...
