ELE-20
5-4. Chroma level adjustment
1. Connect the WFM (for NTSC) or the oscilloscope (for PAL) to the VIDEO OUT with 75ohm termination.
2. Double-click the adjustment item “Chroma level” in the main menu. The following screen will appear.
3. Adjust chroma level by pressing the arrow keys of keyboard so that it is within specification.
4. Click “Write(E
)” button after adjustment has been completed.
NTSC: V (Burst) = 40 IRE
3 IRE
PAL : V (Burst) = 300 mVp-p ± 20 mV
To Next Page
Loading...
