2
Close the cover firmly.
Attaching the handle
The handle comes in handy for taking low-angle
shots or carrying the camera-recorder around.
To remove the handle, first pull the viewfinder
towards you, then loosen the coin screw.
2
Slide the handle into place.
3
Tighten the coin screw to secure the handle
firmly.
O If the coin screw is loose, the camera-
recorder may drop off.
1
Pull the viewfinder towards you.
Coin screw
Attaching the large eye-cup
When you look through the viewfinder while
wearing spectacles or when the area around the
camera-recorder is too bright, you will be able to
see the images in the viewfinder more clearly if
you attach the large eye-cup.
2
Place the large eye-cup over the viewfinder,
and fit it in the direction of the arrows.
1
Turn up the edges of the standard eye-cup
and remove it.
Eye-cup
To Next Page
Loading...
