Panasonic AG-DVC30 - Users Bit and Time Code Settings; Setting the Users Bit

30 (E)
Time data (cont.)
By setting the user’s bit, you can store 8-digit
information (such as the date and time) in the
hexadecimal format on the tape’s sub code
track.
The user’s bit settings are automatically saved
in the memory and retained even after the
power has been turned off.
3
Turn the multi dial to move to the UB
PRESET item.
5
The screen shown below appears. Set the
user’s bit using the multi dial.
Turn the multi dial and select the user’s bit
characters.
O Numbers from 0 to 9 and letters from A to
F can be used as the characters that
make up the user’s bit.
Press the multi dial to move to the next digit.
Setting the user’s bit
1
Set the POWER lever to the ON position.
O
F
F
O
N
M
O
D
E
PB.
ZOOM
MENU
SET
ITEM
SHUTTER/IRIS
VOL/JOG
PUSH
RECORDING SETUPRECORDING SETUP
FIRST REC TC REGEN
TC PRESET ––––
UB MODEUB MODE USER TIME USER TIME
DATE TCG DATE TCG
UB PRESET ––––
ONE–SHOT REC OFF
REC TIME 0.5S
PUSH MENU TO RETURNPUSH MENU TO RETURN
PB.
ZOOM
MENU
SET
ITEM
RECORDING SETUPRECORDING SETUP
FIRST REC TC REGEN
TC PRESET ––––
UB MODE USER
UB PRESETUB PRESET –––––––– YES YES
ONE–SHOT REC OFF
REC TIME 0.5S
PUSH MENU TO RETURNPUSH MENU TO RETURN
SHUTTER/IRIS
VOL/JOG
PUSH
4
Press the multi dial to move
1
to “YES.”
PB.
ZOOM
MENU
SET
ITEM
RECORDING SETUPRECORDING SETUP
FIRST REC TC REGEN
TC PRESET ––––
UB MODE USER
UB PRESETUB PRESET –––––––– YES YES
ONE–SHOT REC OFF
REC TIME 0.5S
PUSH MENU TO RETURNPUSH MENU TO RETURN
SHUTTER/IRIS
VOL/JOG
PUSH
PB.
ZOOM
MENU
SET
ITEM
UB PRESETUB PRESET
F 0 0 0 0 0 0 0
PUSH MENU TO RETURNPUSH MENU TO RETURN
SHUTTER/IRIS
VOL/JOG
PUSH
PB.
ZOOM
MENU
SET
ITEM
UB PRESETUB PRESET
F 0 0 0 0 0 0 0
PUSH MENU TO RETURNPUSH MENU TO RETURN
SHUTTER/IRIS
VOL/JOG
PUSH
UB PRESETUB PRESET
0 0 0 0 0 0 0 0
PUSH MENU TO RETURNPUSH MENU TO RETURN
2
Use the menus (P67-P70) to select “USER”
as the UB MODE item setting on the
RECORDING SETUP screen.