Panasonic AG-DVC30 - Analogue Output Dubbing Process

60 (E)
Dubbing (cont.)
You can use a video deck to dub the images
you have shot using this camera-recorder onto
an S-VHS (or VHS) cassette tape. (P55)
Analogue output
2
Press the 1 button to play back the tape in
the camera-recorder.
5
Press the $ button to stop playing back the
tape in the camera-recorder.
1
Turn the POWER lever to set the camera-
recorder to the VCR mode.
1
O
F
F
O
N
M
O
D
E
POWER
CAMERA
VCR
3
Start recording on the video deck.
4
Stop recording on the video deck.
STILL ADV PAUSE STILL ADV
INDEX
SELECT
VAR.
SEARCH
– VOL +
PB.
ZOOM
STOP INDEX
MULTI/
P-IN-P
REC A.DUB
PLAY
C
/REW FF/
B
SEARCH
RESET
SEARCH DIGITAL ZOOM
REC
COUNTER RESET MODE CHK ZEBRA OIS
PHOTO SHOT BARS
MANUALAUTO
STILL ADV PAUSE STILL ADV
INDEX
SELECT
VAR.
SEARCH
– VOL +
PB.
ZOOM
STOP INDEX
MULTI/
P-IN-P
REC A.DUB
PLAY
C
/REW FF/
B
SEARCH
RESET
SEARCH DIGITAL ZOOM
REC
COUNTER RESET MODE CHK ZEBRA OIS
PHOTO SHOT BARS
MANUALAUTO
PHONES
DV
CAM REMOTE
S-VIDEO
IN/OUT
MIC
AV
IN/OUT
XLR ADAPTER
$ Analogue/digital (AD) conversion
You can use the camera-recorder as an
analogue-digital (AD) converter by using the
menus (P67-P70) to select “ON” as the DV
OUT item setting on the AV IN/OUT SETUP
screen. (P77)
This function enables you to output images,
which were input as analogue signals from
an external unit, as digital signals through the
camera-recorder’s DV connector to another
digital video unit.
O Normally, use the “OFF” setting for the DV
OUT item. If “ON” is selected, the images
may be disrupted.
External unit
Analogue signals
Digital signals
Another digital video unit
Analogue input