ENGLISH
The calendar data (year/month/day/hours/
minutes) is kept in the memory by the internal
battery.
When the “” display appears on the
viewfinder and LCD monitor screen, it means
that the battery has run out.
Follow the steps below to charge the battery.
Set the date and time after the battery is fully
recharged.
1
Connect the AC adapter to the camera-
recorder. (P11)
O Keep the LCD monitor closed.
2
Leave the POWER lever at the OFF position.
3
Leave the camera-recorder like this for about
4 hours.
O The internal battery is charged during this
time.
Time data (cont.)
Charging the internal battery
To Next Page
Loading...
