Panasonic AG-UX90EJ - Page 25

25
SW SETUP <continued>
Menu item
Description
Value (Factory default setting underlined)
ZEBRA MODE
Set the display period of
ZEBRA.
CONTINUE / MOMENT (5sec)
BARS TYPE
Set the type of color bars.
TYPE 1
TYPE 2
TYPE 3
SUB REC BUTTON
Use one of the REC buttons
on the carrying handle.
ACTIVE / INHIBIT
FAST ZOOM
Increase servo zoom speed.
ON / OFF
Note: When this feature is turned ON,
motor operation sound becomes louder,
and could be audible and recorded.
SUB ZOOM
Use one of the zoom levers
on the carrying handle.
OFF / 1 / 2 / 3 / 4 / 5 / 6 / 7
* Zoom speed becomes faster as the
number increases.
DIGITAL ZOOM
Set magnification ratio of the
digital zoom.
x2 / x5 / x10 / TOGGLE
i. ZOOM
Activate electronic image
zoom feature, which can
extend zoom ratio up to x30
(x25 for AG-UX90) while
maintaining a certain image
quality.
ON / OFF
* Enabled when resolution setting is
1920x1080 or lower.
ZOOM/FOCUS
Set a way to operate ZOOM
and FOCUS while under
controlled from the AG ROP
app. (see P. 42)
IP REMOTE / CAMERA
3. MENU settings