45
The following six different scene presets come standard with the camera, and can be user
customized if required.
5-1. SCENE FILE presets
Suitable for recording where the characteristics of fluorescent lamps are taken
into consideration (example: shooting indoors).
Most of the parameters are equal to “F1:” but the MATRIX is adjusted for
fluorescent lighting. This is not particularly necessary under the fluorescent
lighting close to natural light color temperature.
But it is suitable for recording conditions where the color reproduction is poor
due to blue-intense fluorescent lamps.
Suitable for recording with richer color level and sharper contrast.
The picture will be showy with vivid colors and give a bright impression.
Suitable for digital still camera-like recording.
Suitable for movie-like recording where importance is placed on contrast.
This has a Gamma curve that makes a movie-like picture using a video camera.
Suitable for movie-like recording where importance is placed on the Dynamic
Range. This Gamma gives priority to the Dynamic (D) Range and maintains
the gradation that ranges evenly from low to high level.
If the post-production editing or a kinescope is planned, this can be selected
because recording in this mode will make such post-processing easier and
smoother. Also, it will create a unique atmosphere which can sometimes be
used as an effect.
5-2. Factory default settings
* Setting values of each scene file can be overwritten as you like and saved.
5. Understanding scene file operations
To Next Page
Loading...
