Panasonic AG-UX90EJ - Network Setup; Maintenance

33
NETWORK SETUP
Menu item
Description
Value
(Factory default setting underlined)
USER ACCOUNT
Set a user account information
for the AG ROP iPad app.
(See P. 42)
SET / OFF
WIRELESS SETUP
Set a connection method.
DIRECT / SSID(SELECT) /
SSID(MANUAL)
Sub settings when “DIRECT” is chosen. (Choose it when connect an
iPad to AG-UX camera directly)
- SSID: Network ID of the camera.
- BAND: Frequency band to be used (2.4GHz / 5GHz)
- CHANNEL (2.4GHz): Channel when a Wi-Fi adaptor (2.4GHz) is used.
- CHANNEL (5GHz): Channel when a Wi-Fi adaptor (2.4GHz) is used.
- Password: Password to be entered at iPad to access the camera.
(Factory default: 01234567890123456789abcdef)
Choose “SSID (SELECT)” when connect between an iPad and the
camera via a Wi-Fi access point.
Choose “SSID (MANUAL)” when connect between an iPad and the
camera via a Wi-Fi access point while configuring settings manually.
-SSID: Network ID of the camera.
-SECURITY TYPE: Security protocol and certification program
(WPA2-AES / WPA-AES / WPA2-TKIP / WPA-TKIP / NONE)
- Password: Password to be entered to access the access point.
Wireless LAN setup
Set network connection related
items.
IP Address / Subnet Mask / Gateway
/ DHCP / MAC Address
CONNECTION
HISTORY
Display access log with Wi-Fi
access points.
---
NETWORK INITIAL
SETTING
Initialize menu items under
NETWORK SETUP to factory
default.
---
NETWORK SETUP
PASSWORD
Set password to allow / ban on
changing NETWORK SETUP
menu items.
Setup / Delete
MAINTENANCE
Menu item
Description
Value
(Factory default setting underlined)
VERSION
Show the current firmware
version.
---
UPDATE
Executes the firmware update.
---
HOUR METER
Show the following operation
hours and times (cumulative)
---
3. MENU settings