Setup Menu: Menu List
101
PORT9
REC:
Becomes active in the REC or REC PAUSE state.
PLAY
:
Becomes active in the PLAY or REC state.
FF:
Becomes active in the FF state.
REW:
Becomes active in the REW state.
STOP:
Becomes active in the STOP state.
PAUSE:
Becomes active in the STILL or REC PAUSE state.
SHTL:
Becomes active in the SHTL state.
SHTL 0.0:
Becomes active when the speed is the 0.0 state in SHTL.
NO CARD:
Becomes active in the state of all P2 memory card slots and microP2 memory card slots con-
taining no cards. (This is active in USB DEVICE mode.)
REMOTE:
Same as the REMOTE lamp.
ERROR0:
ERROR1:
Becomes active when an error or warning occurs. Becomes active for 3 seconds when
BUSY or warning.
STATUS 0,1= (0,0): No error
(1,0): AUTO OFF
(1,1): BUSY, warning
TC INPUT 0:
TC INPUT 1:
Becomes active in accordance with the time code generator selection state.
INPUT0,1= (0,0): External SLTC
(0,1): External LTC
(1,0): Undefined
(1,1): INT
AUDIO INPUT UNITY:
Becomes active when all of the audio input channels are “UNITY.”
PANEL STOP: Becomes active when the [STOP]
button is in the pressed state.
REC INHIBIT:
Becomes active when all of the recording target P2 cards are in the write protected state.
KEY INHIBIT:
Becomes active when front panel operation is prohibited.
PORT10 The settings are the same as PORT9. The factory default setting is FF.
PORT11 The settings are the same as PORT9. The factory default setting is REW.
PORT12 The settings are the same as PORT9. The factory default setting is REC.
PORT13 The settings are the same as PORT9. The factory default setting is REMOTE.
PORT14 The settings are the same as PORT9. The factory default setting is SHTL 0.0.
Item Settings and brief function description FREQ indications
To Next Page
Loading...
