Setup Menu: Menu List
99
You can assign specific functions set in menus to the [USER1] to [USER6] buttons.
The settings are stored internally and retained even when the unit is turned off and on. The assigned functions and settings can
be confirmed in the DIAG display.
_ is the factory default setting.
USER BUTTON
Item Settings and brief function description FREQ indications
USER1
TEXT MEMO: Functions as the text memo button.
MARKER: Functions as the shot marker ON/OFF button.
DELETE: Functions as the “DELETE” shortcut button.
FORMAT: Functions as the “FORMAT” shortcut button.
COPY: Functions as the “COPY” shortcut button.
EXPORT: Functions as the “EXPORT” shortcut button.
CLIP PROPERTY
: Functions as the “CLIP PROPERTY” shortcut button.
CARD STATUS: Functions as the “CARD STATUS” shortcut button.
ONE CLIP PLAY: Functions as the “ONE CLIP PLAY” button.
SLOT CLIPS:
Switches the thumbnail screen display between “SELECTED CLIPS” ➝ “SLOT1” ➝ “SLOT2” ➝.
SLOT SEL: Changes the P2 card slot for recording.
REC MEDIA: Changes the “REC/PB SETUP” - “REC MEDIA” settings.
DATA DISPLAY: Changes the “DATA DISPLAY” settings.
STOP EE SEL: Changes the “STOP EE SEL” settings.
OUTPUT REF: Changes the “OUTPUT REF” settings.
SEEK POS SEL: Changes the “SEEK POS SEL” settings.
CTL DISPLAY: Changes the “CTL DISPLAY” settings.
TCG MODE: Changes the “TCG MODE” settings.
UBG MODE: Changes the “UBG MODE” settings.
RUN MODE: Changes the “RUN MODE” settings.
EXT TC SEL: Changes the “EXT TC SEL” settings.
VIDEO IN SEL:Changes the “INPUT SEL” (VIDEO) settings.
INT SG: “VIDEO” - Changes the “INT SG” settings.
AUDIO IN SEL: Changes the “INPUT SEL” (AUDIO) settings.
MONITOR CH: Changes the “MONITOR CH” settings.
LEVEL METER: Changes the “LEVEL METER” settings.
OSD OUTPUT: Changes the “OSD OUTPUT” settings.
OSD GRADE: Changes the “OSD GRADE” settings.
WFM TYPE: Changes the “WFM TYPE” settings.
Note:
• The same item can be assigned to other [USER] buttons.
USER2
The settings are the same as “USER1”.
The factory default setting is MONITOR CH
.
USER3
The settings are the same as “USER1”.
The factory default setting is TEXT MEMO
.
USER4
The settings are the same as “USER1”.
The factory default setting is REC MEDIA
.
USER5
The settings are the same as “USER1”.
The factory default setting is LEVEL METER
.
USER6
The settings are the same as “USER1”.
The factory default setting is MARKER
.
To Next Page
Loading...
