5
Accessories
CD-ROM ............................................................................. 1
Camera No. plate (1 to 12) ........................................... 1 set
Camera hangers* ...............................................................
2
Screws* (M3 8 mm) ........................................................ 4
Mount cap ........................................................................... 1
* These accessory parts are used when mounting the buildup
unit (AK-HBU3500). Keep them in a safe place to ensure that
you will not lose or misplace them.
Features
Newly developed 1080I, 2.2 million-pixel CCDs
incorporated
Standard sensitivity of F11 and high sensitivity on a par
with SD.
Smear has been cut to approx. 130 dB and the number
of white marks has been drastically reduced by process
improvements.
H-CCD drive is accomplished at a frequency of 74 MHz to
attain a high response and high resolution.
Digital signal processing LSI with high picture quality
featured in the camera unit
After the process circuits, the signals undergo 14-bit,
74 MHz high-picture-quality digital processing, yielding a
high reliability, more functions and enhanced operating
ease as a result.
Multi-functional enhancer
In addition to the many functions such as skin DTL, there
is a choice of 30 boost frequencies.
Designed to achieve low noise levels of below NC15
Power consumption can be reduced since the fan mode
can be switched according to the situation in which
the camera system is being applied. As a result, the
heat
-dissipation design has also been optimized.
Fuller complement of control circuits and auto setup
(ASU) function
Users can select the standard mode or simplified mode.
Peripheral components
Ease of operation can be further improved by configuring
a system where the Multi-Format Camera is used in
combination with the remote operation panel (ROP) and
master setup unit (MSU).
Data trunk function
T
wo RS-422 and two RS-232C circuits are provided as a
standard feature.
They obviate the need for the cables used with virtual
control, pan-tilt head and lens control, etc.
To Next Page
Loading...
