To Next PageTo Next Page
Need help?Do you have a question about the Panasonic AU-EVA1 and is the answer not in the manual?
General| Maximum Bitrate | 400 Mbps |
|---|---|
| Video Output | HDMI, SDI |
| Internal Recording | Yes |
| Native ISO | 800 |
| Recording Format | AVC-Intra |
| Color Sampling | 4:2:2 10-bit |
| Lens Mount | EF Mount |
| ND Filter | 2 stops, 4 stops, 6 stops |
| Recording Media | SD Card |
| Audio Input | 2 x XLR |
| Weight | 1.2 kg (body only) |
| RAW Output | Yes |
| Sensor Type | Super 35mm 5.7K MOS sensor |
Warning against opening the unit to prevent electric shock hazard.
Precautions regarding battery handling, storage, and replacement.
General warnings, precautions, and initial setup steps before operation.
Guide to select the geographical region for camera initialization and settings.
Details buttons, dials, and switches on the camera's right side.
Lists and explains terminals, card slots, and tally lamps on the rear.
Explains multidial and LCD touchscreen operation techniques.
Details using AC adaptor, charging the battery, and indicators.
Steps for turning power on/off and charging the built-in battery.
Procedure to set the camera's date, time, time zone, and format.
Covers supported cards, formatting, handling, and recording times.
Explains main buttons, screen switching, and basic UI navigation.
Covers HOME, FPS, Color, Shutter, EI, Audio, WB, INFO, VIEW, and Thumbnail screens.
Explains menu structure, types, access methods, and basic operation.
Steps for setting video/audio and starting/stopping recording.
Guide to configure video settings via SYSTEM MODE.
How to set RAW output parameters via SDI RAW settings.
Details dual native ISO and gain modes (ISO/dB).
Steps for setting white balance manually using a white pattern.
Guide to select gamma curves (V-Log, VIDEO, HLG) and adjust master/black gamma.
Configuring knee mode, point, and slope to prevent halation.
How to enable VFR and set recording/reference frame rates.
How to set up and use pre-recording to capture footage before pressing REC.
How to use two SD cards for continuous recording via relay.
How to record the same video to two SD cards concurrently.
How to set up interval recording for frame-by-frame capture.
How to enable zebra patterns and set detection levels.
How to use the one-push AF feature and assign it to a USER button.
How to use the enlarged display for focus assist and assign it to a USER button.
Enabling and configuring peaking and focus square displays for focus assist.
Selecting built-in mic, external mic, or audio device for channels.
Automatic and manual methods for setting audio recording levels.
Step-by-step guide to copy AVCHD clips between SD cards.
Instructions to select and delete clips from the thumbnail screen.
Steps to select and play back clips from the thumbnail display.
Explains output formats from the SDI OUT terminal based on settings.
Details output formats from the HDMI terminal based on settings.
Details indicators for clip name, resolution, frequency, color, format, and status.
Explains status indicators for SD cards in both slots.
Guide to connect headphones for audio monitoring and TV/monitors for video output.
Overview of remote camera control using an iPad or Android device via wireless LAN.
Steps for mounting the wireless module and installing the EVA ROP app.
Details necessary camera settings for remote connection, including user accounts.
How to connect the camera directly or via a wireless access point.
Steps for establishing a direct wireless connection between camera and device.
Explains how the camera notifies users of errors and warnings.
Explains warnings for insufficient battery and high camera temperature.
Covers warnings for recording errors, clip limits, fan stop, and card issues.
Guide on how to check firmware version and update it.
Details sensor, lens mount, optical filter, color temp, gain, and shutter.
Covers media, pixels, codec, system frequency, frame rate, and recording format.
