Panasonic AU-EVA1 - Updating Camera Firmware

– 175 –
Chapter 9 Notes — Updating the camera rmware
Updating the camera rmware
Conrm the rmware version of the camera in the [SYSTEM SETTINGS] menu → [INFORMATION] → [VERSION], and access the most current
information regarding rmware in the website described in NOTE, and download the rmware if required.
@@
NOTE
t Update is completed by loading the downloaded le to the camera via the SD card. Insert the SD card that stores the update le into the card slot 1,
and select the [SYSTEM SETTINGS] menu → [INFORMATION] → [UPDATE]. For update method, refer to the support desk at the following website:
https://pro-av.panasonic.net/
t Always perform update of the rmware with the LCD monitor unit mounted.
t When updating the rmware, use the AC adaptor or sufciently charged battery.
t Do not turn off the power while updating the rmware. Rewriting of the rmware may fail and the camera may not be activated.