Panasonic AU-EVA1 - Copying Clips Between SD Cards

– 145 –
Chapter 6 Playback — Thumbnail operation
Copying clips
Clip can be copied between the SD cards.
Only the clip recorded in AVCHD can be copied.
COPY
Fig. 1 Fig. 2
Fig. 4Fig. 3
Fig. 5
1
Press the <THUMBNAIL> button.
The thumbnail screen is displayed.
2
Press the <MENU> button while the thumbnail screen is displayed.
The menu is displayed.
3
Select the [THUMBNAIL] menu → [CLIP] → [COPY].
4
Select [SELECT]. (Fig. 1)
f Selecting [ALL] will copy all the clips between the SD cards.
5
Select the card slot for the copy destination. (Fig. 2)
The clips in the SD card of the copy source is displayed in the thumbnail screen. (Fig. 3)
f [SLOT1→SLOT2]: Clip can be copied from the SD card in the card slot 1 to the SD card in the card slot 2.
f [SLOT2→SLOT1]: Clip can be copied from the SD card in the card slot 2 to the SD card in the card slot 1.
6
Select the clip to copy in the thumbnail screen.
is displayed on the selected clip.
7
Select . (Fig. 4)
f This can also be selected by pressing and holding the multidial.
8
When the confirmation message is displayed, select [SET].
Progress bar is displayed, and the copy of the clip starts.
f To cancel the copy midway, select [CANCEL].
9
When the completion message is displayed, select . (Fig. 5)