Panasonic AU-EVA1 - Setting the Region of Use

– 15 –
Chapter 1 Overview — Setting the region of use
Setting the region of use
The camera is shipped with the region of use not set.
[AREA SETTINGS] is displayed in the LCD monitor when the power is turned on for the rst time.
Follow the guidance and make the settings in the order of [AREA SETTINGS], [TIME ZONE], and then [CLOCK SETTING].
f There are two methods of operation, a method to operate with the multidial, or a method to touch the LCD monitor.
[AREA SETTINGS]
Set the region of use.
1
Connect the charged battery or the AC adaptor to the camera, and set the power switch to < > (ON).
The [AREA SETTINGS] screen is displayed.
2
Select the region of use.
[AREA 1]: Japan, Taiwan, South Korea
[AREA 2]: United States of America, Canada, Central and South America regions
[AREA 3]: Asia region (excluding Japan, Taiwan, South Korea), Oceania region, India
3
When the confirmation message is displayed, select [YES].
The camera will be initialized in accordance to the region selected in Step 2. The camera will automatically restart.
@@
NOTE
t Once this is set, the [AREA SETTINGS] screen is not displayed from the next startup.
t To change the region of use, set with the [OPTION] menu → [AREA SETTINGS].
r Setting contents of each region of use
Following setting differs depending on the selected region.
f The [SYSTEM SETTINGS] menu → [CLOCK] → [DATE FORMAT]
f The [AUDIO SETTINGS] menu → [AUDIO CH SETTINGS] → [HEAD ROOM]
f The [SYSTEM SETTINGS] menu → [LANGUAGE]
Item [AREA 1] [AREA 2] [AREA 3]
[DATE FORMAT] [Y-M-D] [M-D-Y] [D-M-Y]
[HEAD ROOM] [20dB] [20dB] [18dB]
[LANGUAGE]* [English] [English]
[Español]
[Français]
[English]
[Español]
[Français]
* When [AREA 1] is selected, [LANGUAGE] is not displayed as the [SYSTEM SETTINGS] menu item.
[TIME ZONE]
Once the setting for [AREA SETTINGS] is completed, the [TIME ZONE] screen is displayed.
Set the time difference from the Greenwich Mean Time.
1
Set the time difference.
2
Select [SET].