– 43 –
Chapter 3 Preparation — Mounting accessories
f Mount the mount cap turning in clockwise direction with the mark on the mount cap at the top.
@@
NOTE
t Do not touch the EF lens mount and inside the EF lens mount.
t Attach the mount cap to the EF lens mount. Use the mount cap after removing dirt and dust.
Attaching a tripod
The tripod attachment holes accept 1/4-20 UNC and 3/8-16 UNC screws. Use the hole that matches the diameter of the clamping screw on the tripod.
@@
NOTE
t Use a tripod in safe locations.
t The depth of the tripod attachment hole is 5.5 mm. Do not over-tighten the tripod screw when mounting the camera to a tripod.
To Next Page
Loading...
