Panasonic AK-HRP1005G

Item Setting details
I CENTER Sets the center position (area to which skin tone is applied) on the I axis.
I WIDTH Sets the width of the area to which skin tone is applied on the I axis using the [I CENTER] setting as the center.
Q WIDTH Sets the width of the area to which skin tone is applied on the Q axis using the [I CENTER] setting as the center.
Q PHASE Sets the phase of the area where the skin tone effect is applied, with the Q axis being the reference.
SKIN TONE DETAIL Enables/disables the skin tone detail function.
- 29 -
ROP Menu (when AK-UB300G is connected)