Panasonic AK-HRP1005G

24 CONNECT SETTING
ヒチバチヒヘ
ヤヰワワユヤヵチヴユヵヵリワヨ
ヤヰワワユヤヵチヮヰュユドㄑㄖㄔㄉナ
ヤモヮビ
ヤモヮブ
ヤモヮピ
ヤモヮプ
ヤモヮヒ
ヤモヮフ
ヴㄆㄓㄊ㄂ㄍロモワワヰワ
ワヰワワヰワワヰワ
ヤヰワワユヤヵチヮヰュユドㄑㄖㄔㄉナ
ビチバチヒヘ
ヤヰワワユヤヵチヴユヵヵリワヨ
ヤヰワワユヤヵチヮヰュユドㄑㄖㄔㄉナ
ヤモヮベ
ヤモヮヒヒ
ヤモヮペ
ヤモヮヒビ
ヤモヮヘ
ヤモヮヒパ
ワヰワワヰワワヰワ
ワヰワワヰワワヰワ
ヤヰワワユヤヵチヮヰュユドㄑㄖㄔㄉナ
ヒヘチバチヒヘ
ヤヰワワユヤヵチヴユヵヵリワヨ
ヤヰワワユヤヵチヮヰュユドㄑㄖㄔㄉナ
ヤモヮペベヤモヮペペヤモヮペヘ
ワヰワワヰワワヰワ
Item Setting details
CONNECT MODE CAM1 Sets the connection method for camera 1.
Changes to settings are applied by pressing the [MENU] dial.
Serial, LAN: Select this when connecting to the AK-UC3000 series or AK-HC5000 series.
Serial(AK), LAN(AK): Select this when connecting to the AK-HC3500A series or AK-HC3800
series.
Serial(AW), LAN(AW): Select these when connecting the AK-UB300G series.
[Serial], [Serial(AK)], and [Serial(AW)] cannot be set for multiple cameras.
CONNECT MODE CAM2 to
CAM99
Sets the connection method for cameras 2 to 99.
Changes to settings are applied by pressing the [MENU] dial.
Serial, LAN: Select this when connecting to the AK-UC3000 series or AK-HC5000 series.
Serial(AK), LAN(AK): Select this when connecting to the AK-HC3500A series or AK-HC3800
series.
Serial(AW), LAN(AW): Select these when connecting the AK-UB300G series.
[Serial], [Serial(AK)], and [Serial(AW)] cannot be set for multiple cameras.
NOTE
An AK-UB300G with a system version of 07.0A-000-00.00 or later can be connected.
[Serial(AW)] can be selected if this unit has a system version of 4.50-00-0.00 or later.
- 42 -
ROP Menu (when AK-UB300G is connected)