Panasonic AK-HRP1005G

Compatible Functions List
When the unit is used in conjunction with an AK-UB300G Series Multi-Purpose Camera, some of the unit's button, dial, and other control
functions will be limited or disabled. Be sure to refer to the following table.
NOTE
The descriptions in this document assume that the system version of the unit is V4.40-00-0.00 or later. Make sure that the system
version of the AK-UB300G used in conjunction with the unit is V7.52-000-00.00 or later.
Front panel 1
Front panel 2
Front panel 3
Front panel 4
Front panel 5
Front panel 6
Number Part name
✓ : Enabled
×: Disabled
Remarks
Front panel 1
[PANEL LOCK] button ✓
[AUTO] button ✓ If auto setup has been assigned, this will not
operate.
[BARS] button ✓ Only the ON/OFF for the color bar signal
output will function.
[TALLY/CALL] lamp/button ×
[REF. RECALL] button ×
[FILES] button ✓ This indicator is off when a scene file is not
selected.
[SETUP] button ✓
[AUTO IRIS] button ✓
Front panel 2
Function buttons ✓
LCD panel ✓
Menu operation dials ✓
- 5 -
Connecting the Unit to AK-UB300G Series Cameras