Panasonic AK-HRP1005G

Connections
Set the connection setting to [Serial(AW)] or [LAN(AW)] in the [CONNECT SETTING] menu.
ヒチバチヒヘ
ヤヰワワユヤヵチヴユヵヵリワヨ
ヤヰワワユヤヵチヮヰュユドㄑㄖㄔㄉナ
ヤモヮビ
ヤヰワワユヤヵチヮヰュユドㄑㄖㄔㄉナ
ヤモヮブ
ヤモヮピ
ヤモヮプ
ヤモヮヒ
ヤモヮフ
ヴㄆㄓㄊ㄂ㄍ
ドモヸナ
ロモワ
ドモヸナ
ワヰワ
ワヰワワヰワワヰワ
When connecting, observe the following points.
Serial connection
Use a dedicated cable to connect the [CCU] connector of this unit to the <I/F> terminal of the AK-UB300G.
Use a PoE injector for the power supply.
LAN connection
Connect the [LAN] connector on this unit to the <LAN> connector on the AK-UB300G using a LAN cable (sold
separately).
This unit can be powered using PoE. Use a switching hub with PoE support.
Use a straight cable (category 5e or higher; up to 100 m (328.0 ft) in length) for the LAN cable (STP).
For details on switching hubs and PoE injectors that have been verified to support PoE, consult with your dealer.
- 4 -
Connecting the Unit to AK-UB300G Series Cameras